home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
New Star Software Collection
/
NSS_Collection.iso
/
3-023 photo finish 20
/
1.ima
/
FULLPAGE.DO_
/
FULLPAGE.bin
Wrap
Text File
|
1992-03-25
|
2KB
|
50 lines
FULLPAGE.SYS
You use the FULLPAGE.SYS scanner driver with the Complete
PC FullPage Scanner.
The FullPage scanner is not entirely programmable from the
program. It has switches you can use to vary resolution and
halftone patterns. The resolution you set in the program
must match the resolution you set on the scanner. You can
vary brightness with the scanner's slide switch.
To manually add the device driver to your CONFIG.SYS, use a text
editor to type the entry as it appears below. Be sure to
include a path if the scanner driver is not in your root directory.
Remember to include additional parameters when necessary.
CONFIG.SYS entry:
device=FULLPAGE.SYS
Available port addresses and the parameters you should add
to your CONFIG.SYS:
Port 3E0H The default for this scanner. Add the parameter
/H3EO to your CONFIG.SYS.
Port 3A0H Add the parameter /H3A0 to your CONFIG.SYS.
Port 360H Add the parameter /H360 to your CONFIG.SYS.
Port 320H Add the parameter /H320 to your CONFIG.SYS.
Port 2E0H Add the parameter /H2E0 to your CONFIG.SYS.
Port 2A0H Add the parameter /H2A0 to your CONFIG.SYS.
Port 260H Add the parameter /H260 to your CONFIG.SYS.
Port 220H Add the parameter /H220 to your CONFIG.SYS.
Available DMA Channels and the parameters you should add to your
CONFIG.SYS:
DMA Channel 1 Add the parameter /C1 to your CONFIG.SYS.
DMA Channel 3 The default for this scanner. Add the parameter
/C3 to your CONFIG.SYS.
Settings supported by this scanner:
Brightness Set on scanner, continuously variable
Contrast Not supported by scanner
Colors B&W only
Halftones Bayer, Mesh, and Spiral patterns
in 4x4 and 8x8 sizes
Resolutions 300x300, 200x200
Set on scanner and within the program